×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Using 1300 with Yagi

Unanswered Question
Feb 24th, 2006
User Badges:

hi to all


I am stuck in a problem, we have a aironet 1300 series with yagi antenna we get the response but it was very hi i.e 1500 msec

Can any body tell me wat can i do to decrease the response time. as the distance to main branch is 5Km.


Please help me regarding this issue.


Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
scottmac Sat, 02/25/2006 - 07:30
User Badges:
  • Green, 3000 points or more

It's likely to be an interference issue. The interference is (probably) causing a high nuber of re-transmits.


Try lowering your RTS threshold.


Try other channels.


Verify that your antennas are optimally aimed.


If none of the above works, you may need to switch to a parabolic (dish) antenna(s) - they have a tighter pattern for transmit and receive and perhaps you can exclude or reduce the interfering signal.


Good Luck


Scott


Actions

This Discussion