×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

876 ADSL Line Problems

Unanswered Question

Hi,


we have an C876 ADSL CPE (PPPoE) which is not able synchronise on the DSL line (CD LED keeps flashing).

We have already replaced the CPE without success. However, a SOHO96 or a C836 work on this line without probs. Even the C876 work on other lines without probs.


I am running c870-adventerprisek9-mz.123-8.YI3.bin on the C876. Config is:


interface ATM0

description T-DSL

no ip address

no ip redirects

no ip unreachables

no atm ilmi-keepalive

pvc 1/32

pppoe-client dial-pool-number 1

!

dsl operating-mode auto


interface Dialer1

ip address negotiated

ip mtu 1456

encapsulation ppp

ip tcp adjust-mss 1416

dialer pool 1

dialer-group 1

no cdp enable

ppp authentication chap callin

ppp chap hostname xxxx

ppp chap password xxx


Any idea what the difference between 876 and 836 resp. SOHO could be? Is the C876 chipset more sensitive against noise?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nethelper Mon, 02/27/2006 - 14:28
User Badges:
  • Silver, 250 points or more

Hello Olaf,


some older ISP DSLAMs have a problem with the 876. Who is your ISP ?

You could also try ´dsl operating-mode ansi-dmt´, sometimes that makes a differenec.

I assume you are sure that your ISP uses CHAP for authentication ? Otherwise try:


ppp authentication chap pap callin

ppp chap hostname xxxx

ppp chap password xxx

ppp pap sent-username username password 0 password


Regards,


Nethelper


Actions

This Discussion