×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

wireless closes calls with IP Commnunicator 2.0

Unanswered Question
Mar 1st, 2006
User Badges:

Hi all.


When we use Dell laptop connected to our lan Ethernet using the Broadcon 570X NIC with wireless NIC radio activated, IP Communicator close our voice after a minute.


The call is still activated, but the called doesn’t listen our voice. So we have to disable the radio wireless.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
thomas.chen Tue, 03/07/2006 - 07:12
User Badges:
  • Silver, 250 points or more

If the remote party cannot hear the person who placed the call on a Cisco IP Communicator, it may be for one of the following reasons:


The Cisco IP Communicator party has muted the recording device.


The Cisco IP Communicator party has plugged the headset and speaker plugs into the wrong ports on the PC.


The Cisco IP Communicator party is running another application that is using the microphone, such as a sound recorder or another software-based phone.


The Cisco IP Communicator audio settings are incorrect. See the Cisco IP Communicator User Guide for more information.


http://www.cisco.com/en/US/products/sw/voicesw/ps5475/products_administration_guide_chapter09186a00805f0882.html

Actions

This Discussion