AS5300 IOS UPGRADING PROBLEM

Unanswered Question
Mar 3rd, 2006
User Badges:

hi


I have problem . i m uploading IOS via Ronmon but error are as follow.


Frist status is :::


System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory


loadprog: error - trouble reading file magic number

open: failed to find and/or load the bootloader: "bootflash:c5300-js-mz.123-15.b

in"

loadprog: error - on file open

boot: cannot load "cisco2-AS5300"


System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory


device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"


System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory


loadprog: error - trouble reading file magic number

boot: cannot load "bootflash:"


System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory


and mem info is :::::::::


rommon 1 > meminfo


Main memory size: 128 MB. Packet memory size: 16 MB

Available main memory starts at 0xa000e000, size 0x7ff2000

Packet memory starts at 0xa8000000

NVRAM size: 0x20000


when I run commond Xmodem than errors comes


1) transfer canceled by remote system.


and 2nd ::::::::::::

modem c5300-is-mz.122-17.bin

Do not start the sending program yet...

File size Checksum File name

0 bytes (0x0) 0xffff c5300-js-mz.123-15.bin


WARNING: All existing data in bootflash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n [n]: y

Ready to receive file c5300-is-mz.122-17.bin ...

BB0

ERR:Image size exceeds free flash space

rommon 3 >


plz check the thing and advice.


Thanks



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
leonvd79 Fri, 03/03/2006 - 06:01
User Badges:
  • Silver, 250 points or more

You are trying to load an image that is to large for your flash filesystem. Try another image, upgrade your flash memory or boot via TFTP.


HTH


Leon


* Please rate useful posts.

Richard Burts Fri, 03/03/2006 - 08:13
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

The poster originally posted exactly this same question on the WAN Routing and Switching forum where it has gotten a couple of responses. I suggest that we consolidate the discussion on that forum.


HTH


Rick

Actions

This Discussion