AS5300 IOS UPGRADING PROBLEM

afzaalqadir · ‎03-03-2006

hi

I have problem . i m uploading IOS via Ronmon but error are as follow.

Frist status is :::

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

loadprog: error - trouble reading file magic number

open: failed to find and/or load the bootloader: "bootflash:c5300-js-mz.123-15.b

in"

loadprog: error - on file open

boot: cannot load "cisco2-AS5300"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

loadprog: error - trouble reading file magic number

boot: cannot load "bootflash:"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

and mem info is :::::::::

rommon 1 > meminfo

Main memory size: 128 MB. Packet memory size: 16 MB

Available main memory starts at 0xa000e000, size 0x7ff2000

Packet memory starts at 0xa8000000

NVRAM size: 0x20000

when I run commond Xmodem than errors comes

1) transfer canceled by remote system.

and 2nd ::::::::::::

modem c5300-is-mz.122-17.bin

Do not start the sending program yet...

File size Checksum File name

0 bytes (0x0) 0xffff c5300-js-mz.123-15.bin

WARNING: All existing data in bootflash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n [n]: y

Ready to receive file c5300-is-mz.122-17.bin ...

BB0

ERR:Image size exceeds free flash space

rommon 3 >

plz check the thing and advice.

Thanks

leonvd79 · ‎03-03-2006

You are trying to load an image that is to large for your flash filesystem. Try another image, upgrade your flash memory or boot via TFTP.

HTH

Leon

* Please rate useful posts.

Richard Burts · ‎03-03-2006

The poster originally posted exactly this same question on the WAN Routing and Switching forum where it has gotten a couple of responses. I suggest that we consolidate the discussion on that forum.

HTH

Rick

HTH

Rick