I have problems with a Cisco Aironet Access Point 1200 series (AIR-AP1231G-A-K9). This one presents connectivity problems since it shows resets on Fast Ethernet and radio interfaces. Now, already the physical level of the network is being checked with regard to the Fast Ethernet interface. But why are there resets in the radio interface? What can cause them?
Following the AP information:
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA1, RELEASE S
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Thu 06-Oct-05 09:40 by evmiller
ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (
AP1200_B11Ing uptime is 1 week, 1 day, 20 hours, 39 minutes
System returned to ROM by power-on
System image file is "flash:/c1200-k9w7-mx.123-7.JA1/c1200-k9w7-mx.123-7.JA1"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 14838K/15
36K bytes of memory.
Processor board ID FOC09451RU0
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:15:FA:A4:1E:50
Part Number : 73-8704-10
PCA Assembly Number : 800-23211-11
PCA Revision Number : A0
PCB Serial Number : FOC09451RU0
Top Assembly Part Number : 800-23304-11
Top Assembly Serial Number : FTX0947J04M
Top Revision Number : A0
Product/Model Number : AIR-AP1231G-A-K9
Configuration register is 0xF
Dot11Radio0 is up, line protocol is up
Hardware is 802.11G Radio, address is 0015.f9a6.5880 (bia 0015.f9a6.5880)
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:49, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/34772/0 (size/max/drops/flushes); Total output drops: 237
Queueing strategy: fifo
Output queue: 0/30 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 19000 bits/sec, 22 packets/sec
189594 packets input, 24783974 bytes, 0 no buffer
Received 9410 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
4095456 packets output, 616703788 bytes, 0 underruns
7709 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Thanks in advance.
Ramiro Marulanda Z.