Is there a particular component on the PIX that you want the firmware version of ? The PIX runs software, not firmware, and that is what you see with 'show version'

Paresh

Hello Paresh,

The below pix's show version 6.2(2) is the pix's OS version,but i need to know its firmware version.

pixfirewall# sh version

Cisco PIX Firewall Version 6.2(2)

Cisco PIX Device Manager Version 2.1(1)

Compiled on Fri 07-Jun-02 17:49 by morlee

pixfirewall up 82 days 19 hours

Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 000b.bed3.7e75, irq 10

1: ethernet1: address is 000b.bed3.7e76, irq 11

2: ethernet2: address is 0002.b3d9.f100, irq 11

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Enabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Serial Number: 807020507 (0x301a27db)

Running Activation Key: 0x56ac8799 0xff4cdd22 0x7f05220e 0xad83e5c9

Configuration last modified by enable_15 at 10:09:26.933 UTC Mon Mar 13 2006

pixfirewall#

Regards,

Norung

please excuse me for not following the entire conversation.

i was just wondering what you are referring to as a firmware. i usually use the term pix os and pix firmware referring to the same thing. so v6.2(2) would the answer you are looking for.

Hi Jackko,

Thanks for your reply. But I still wondering that why the Cisco router's IOS and Firmware software are different and Pix's OS

and Firmware are the same.

Regards,

Norung