Channelize a T1 in callmanager

Unanswered Question
Mar 13th, 2006
User Badges:
  • Bronze, 100 points or more

Is it possible to channelize a T1 (Cas or PRI) in callmanager? I have a T1 with 24 ARD circuits, each channel has a unique ARD circuiton it. I need to configure plar for each indiviual channels.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
aamercado Mon, 03/13/2006 - 20:53
User Badges:
  • Bronze, 100 points or more

yes, possible with CAS, but I not possible with PRI unless you have a AS53xx. At any point, it depends with Telco.


Here's an example


controller T1 0/1/0

framing esf

linecode b8zs

ds0-group 1 timeslots 1 type fxo-loop-start

ds0-group 2 timeslots 2 type fxo-loop-start

ds0-group 3 timeslots 3 type fxo-loop-start

etc....

Actions

This Discussion