03-13-2006 10:40 PM
Hi,
My pix device config is not getting archived in CiscoWorks RME after upgradation of device from version 6.3 to 7.0.
Prior to upgrade the device config was getting archived properly.
My CW version details are given below.
CiscoWorks Common Services with SP2
Resource Manager Essentials 3.5
Resource Manager Essentials Incremental Device Support 3.5
RME3_5_IDU -13_0 Resource Manager Essentials 3.5 Incremental Device Update 13.0 (latest version)
Configuration Archive 3.5
Configuration Archive Device Support for the PIX Firewall 1.4
Do I have to install some new package/patch for the PIX config to get archived ?
Regards
Vijay
03-14-2006 05:27 AM
This looks like CSCsb89594:
RME does not work for PIX with multi context feature enabled
Unfortunately there doesn't seem to be fix for it.
03-14-2006 07:04 AM
Thanks for your reply
Currently the pix has the following features licensed.
-----------------------------------------------
Licensed features for this platform:
Maximum Physical Interfaces : 10
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
-------------------------------------------------
However when I check the mode status I get the following output.
-------------------------------------------------
fw# sh mode
Security context mode: single
-------------------------------------------------
The multicontext feature is not being used so will the CSCsb89594 bug apply to this situation.
Regards
Vijay Sequeira
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide