03-17-2006 07:02 AM - edited 03-13-2019 12:35 PM
Hi all. I have problem with "hold" feature on CCM 4.1(3)SR3. Pressing HOLD softkey during active call cause disconnect of call.
I tried to debug (debug voice ccapi detail) this situation on voice GW (see attach) and received " DisconnectText no resource (47)"
1BA : 2106 198143480ms.1950 +3060 19540 pid:200 Originate 43
dur 00:00:16 tx:218/34880 rx:218/34880 2F (no resource (47))
IP 10.10.0.42:20192 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711alaw
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
1BA : 2105 198143450ms.1951 +3110 +19600 pid:989 Answer 257111392
dur 00:00:16 tx:218/34880 rx:218/34880 2F (no resource (47))
IP 213.235.87.71:18610 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711alaw
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
Any idea ??? Thanks Miroslav
03-17-2006 07:16 AM
Please take a debug q931 of the issue, if you see the following:
Out Message -- PriNotifyMsg -- Protocol= PriDmsProtocol
Ie - Ni2ConnectedNumIe IEData=
***Message - Missing Mandatory IE in Sdl Message
Please upgrade to CCM sr3a
03-19-2006 11:38 PM
Sorry, I wrote is wrong. I am using SR3a yet :o(
Miroslav
03-20-2006 09:38 AM
Yikes! That's a spooky bug. :-( I would imagine that it isn't happening to a lot of people but I'm very interested to hear what's causing this.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: