FXs Problem busy tone

Unanswered Question
Mar 20th, 2006
User Badges:

i have fxs port in router 3845,

i configured it , whenever i dial it ,it gives me busy tone always ,and there is no call


the problem with port 1/0/1



ElGomhurya_2#sh voice port summary

IN OUT

PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC

========= == ============ ===== ==== ======== ======== ==

1/0/0 -- fxs-ls up dorm on-hook idle y

1/0/1 -- fxs-ls up up on-hook idle y

1/1/0 -- fxs-ls up dorm on-hook idle y

1/1/1 -- fxs-ls up dorm on-hook idle y






voice-port 1/0/0

timeouts interdigit 2

!

voice-port 1/0/1

timeouts interdigit 2

!

voice-port 1/1/0

timeouts interdigit 2

!

voice-port 1/1/1

timeouts interdigit 2

!

!

!

dial-peer cor custom

!

!

!

dial-peer voice 2222 pots

destination-pattern 2222

port 1/0/0

!

dial-peer voice 1 voip

destination-pattern .T

session target ipv4:172.21.100.1

!

dial-peer voice 8833 pots

destination-pattern 8833

port 1/1/0

!

dial-peer voice 6677 pots

destination-pattern 6677

port 1/1/1

!

dial-peer voice 1234 pots

destination-pattern 1234

port 1/0/1


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
spremkumar Mon, 03/20/2006 - 06:31
User Badges:
  • Red, 2250 points or more

Hi


Can you post out the config related to the dial peer POTS and VOIP ? also whether you have enabled the voice ports which is instaled in the router..


regds


davidcruise Mon, 03/20/2006 - 13:12
User Badges:

2222

8833

6677 working normally


but 1234 gives me busy tone whenever i dial it

darren.staples@... Thu, 10/04/2007 - 14:30
User Badges:



I am having the same problem

have a vg224 with multiple faxes.

When call from fax to fax completes the port

is fine (dormant/onhook)


but when a call is incomplete, like if you call from your phone, (hear the fax attempt negotiation), then hangup.


that port's state remains up (up/onhook) and until reset the port, it is not usable.


have tried adding "timeouts call-disconect 10"

and "timesout wait-release 10", reset the port, but made no difference. then changed the 10 to 5 - no help. removed call-disconnect and left just wait-release - no help.


any ideas?

Actions

This Discussion