Weird Config

Answered Question

I have two 3750’s connected by a dot1q trunk and a switchport access link (see Visio attachment). I want all vlan traffic except vlan 100 to route through the trunk and only vlan100 to route through the switchport access link. Will this configuration work? I’ve included the switch configs.



Correct Answer by bhedlund about 11 years 5 months ago

If you require Layer2 COS markings present in the frames then yes this would be better.


Please rate all helpful posts.


Brad



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
pkhatri Wed, 03/22/2006 - 17:19
User Badges:
  • Purple, 4500 points or more

Hi,


Your config looks fine and it should work.


Paresh

pkhatri Wed, 03/22/2006 - 17:19
User Badges:
  • Purple, 4500 points or more

Just one thing you can do to verify this: enter 'show interface trunk' on the 3750s to make sure that VLAN 100 is not being passed over the trunk links.


Hope that helps - pls rate the post if it does.


Paresh

Correct Answer
bhedlund Thu, 03/23/2006 - 09:50
User Badges:
  • Silver, 250 points or more

If you require Layer2 COS markings present in the frames then yes this would be better.


Please rate all helpful posts.


Brad



Actions

This Discussion