CCME and gatekeper integration

Unanswered Question
Mar 28th, 2006
User Badges:

I have branch router 1760 with CCME and trying to register with central site VOIP gatekeeper router 7200.

Under branch router config I am configuring following under each local POTS dial peer to avoid these register with gatekeeper:

dial-peer voice 150 pots

destination-pattern 8#T

port 0/1/0

forward-digits 7

no register e164


But for the ephone configs which appear as virtual dial-peers there is no way of appliying "no register e164" command to avoid these local ip-phone directory numbers ( actually these are branch extension mumbers) getting registered with central gatekeeper.

Is there any workaround for this issue ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
anup.anand Tue, 03/28/2006 - 05:03
User Badges:
  • Silver, 250 points or more

You can set this up in the ephone-dn using the no-reg keyword


ephone-dn 10

number 5000 secondary 6000 no-reg [both|primary]

Depending on your setup, you can either not register both numbers or just the primary.




This Discussion