×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
amit-singh Thu, 03/30/2006 - 06:03
User Badges:
  • Blue, 1500 points or more

Hi,


Do you know the SNMP community string of the switch if configured, then you can use the SNMP based discovery on the network and get the IP of that switch.


If not then the easiest way is to console into the switch and get the info. If you have some old config saved with you, you can check in that also.


HTH, Pls rate if it does.


-amit singh

mohamed-khadr Fri, 03/31/2006 - 10:08
User Badges:

Amit, Ok, Got it. Used SNMP discovery & got it.

Thx a lot

mohAmed


Actions

This Discussion