Node discovery

mohamed-khadr · ‎03-30-2006

Hello,

If I don't have CDP enable or IP add. of a switch on the network, how I find out the add of this switch?

Thx

amit-singh · ‎03-30-2006

Hi,

Do you know the SNMP community string of the switch if configured, then you can use the SNMP based discovery on the network and get the IP of that switch.

If not then the easiest way is to console into the switch and get the info. If you have some old config saved with you, you can check in that also.

HTH, Pls rate if it does.

-amit singh

mohamed-khadr · ‎03-31-2006

Amit, Ok, Got it. Used SNMP discovery & got it.

Thx a lot

mohAmed