ASA5510 Issue First Part

Unanswered Question
Apr 2nd, 2006
User Badges:

Hi there. I'm trying to configure an ASA5510 with no luck.

My network is very simple. Computers on the inside with a single router connected to the internet. Use NAT to protect inside addresses and allows access to cetain machines with static addresses.

Here is my config file. Can someone help me to see what I'm mising. I can ping the inside interface and the gateway but nothing outside. Traffic will not flow out or in.

Result of the command: "show running-config"



name charlies

name exme01

name webserver

name server

interface Ethernet0/0

nameif outside

security-level 0

ip address

interface Ethernet0/1

nameif inside

security-level 100

ip address

interface Ethernet0/2


no nameif

no security-level

no ip address

interface Ethernet0/3


no nameif

no security-level

no ip address

interface Management0/0

nameif management

security-level 100

ip address


passwd xxxxxxxxx encrypted

boot config disk0:/asa711

ftp mode passive

dns domain-lookup outside

dns name-server

object-group network MYSERVERS

network-object webserver

network-object server

network-object exme01

network-object charlies

object-group service WEBSERVICES tcp

port-object eq www

port-object eq https

object-group service EMAILSERVICES tcp

port-object eq pop3

port-object eq smtp

port-object eq chargen

object-group service VPNSERVICES tcp

port-object eq pptp

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion