04-03-2006 06:49 AM - edited 03-03-2019 02:37 AM
Hello everyone,
Anyone have a clue to what this is? On a sup720 6500
Thx v.much
Ken
Solved! Go to Solution.
04-03-2006 07:05 AM
Hi Ken,
The static mac-address you are refering to is programmed in hardware automatically by the supervisor software. This is normal. That's reserved for IPv6's all-nodes multicast.
Have a look at
http://www.faqs.org/rfcs/rfc2464.html for more information.
To stop these from being learned, use
"no ipv6 mld snooping" in global configuration mode.
The learned entries should age out once that is configured and won't be relearned.
HTH,
Bobby
*Please rate helpful posts
04-03-2006 07:05 AM
Hi Ken,
The static mac-address you are refering to is programmed in hardware automatically by the supervisor software. This is normal. That's reserved for IPv6's all-nodes multicast.
Have a look at
http://www.faqs.org/rfcs/rfc2464.html for more information.
To stop these from being learned, use
"no ipv6 mld snooping" in global configuration mode.
The learned entries should age out once that is configured and won't be relearned.
HTH,
Bobby
*Please rate helpful posts
04-06-2006 03:56 AM
Brilliant!
thx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: