×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

call manager express redundancy

Unanswered Question
Apr 18th, 2006
User Badges:
  • Bronze, 100 points or more

hey,


a customer would like to have two call manager express systems setup for redundancy. he doesnt require both to be active or anything like that but i was thinking of setting up the systems like that. we have currently a 3560 switch connected to the live system. im thinking of a way to set up both and failover automatically in the case of one system failing.


can anyone point me in the right direction?. im thinking virtual ip addresses setup on the switch?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
adignan Tue, 04/18/2006 - 05:40
User Badges:
  • Blue, 1500 points or more

The old way of configuring redundant CME routers was to use HSRP. Beginning with IOS 12.4(4)XC you can configure a secondary CME router


1. enable

2. configure terminal

3. telephony-service

4. ip source-address ip-address port port secondary ip-address [rehome seconds]] [any-match | strict-match]



http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805abba7.html#wp1071989


please rate helpful posts.


adignan - berbee

Actions

This Discussion