cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
3
Helpful
5
Replies

CME and ATA's both ports

recep.sefer
Level 1
Level 1

How can I configure CME 4.0 (SCCP)

to use both ports of ATA 186

How can I configure

ephone and ephone-dn

statements

5 Replies 5

yshraybman
Level 4
Level 4

Just like any other phone. When ATA registers with CME first time, CME automatically creates dynamic ephones. For ex: last configured ephone is 10, CME will create ephone 11 and 12. Notice the MACs and put them under ephone config of your choice. ATA must be unregistered in order to move ATA MAC between ephones.

If you already know MACs you can configure ephones beforehands and you'll be done.

Configure ephone-dn like any other phone.

ephone-dn 7

number 4907

label 4907

description Fax

name Fax

ephone 7

username "xxx" password xxx

mac-address ATA-MAC-line1

type ata

button 1:7

Same thing for line 2

ATA has only one mac adress

If mac of ata is 00075234AA32 use this for primary port.

For second port try, 075234AA3201. (Shift the left most two digits and add a 01 at the end).

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Let ATA register with CME for the first time, then do 'show ephone ata' and you will see 2 MACs.

I am interested in knowing which solution worked for you ?

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: