VPN issue

Unanswered Question
Apr 23rd, 2006
User Badges:

Hi Guys,


I have a pair of ASA 5500 with ipsec tunnel in between. The issue is I am able to "ping" and connect to most of the nodes on the other side of the network but not all the nodes, especially those networked printers. I checked ip,mask and gateway and they are all correct. I amm also able to "ping" those nodes in the internal network (not remote side. Please help!!!!



Thank you so much



John

the other site

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
b.speltz Mon, 05/01/2006 - 05:18
User Badges:
  • Bronze, 100 points or more

Check for any filtering of IP address like access list in the remote side router and also for ICMP

Fernando_Meza Mon, 05/01/2006 - 17:31
User Badges:
  • Gold, 750 points or more

you need to check what is in between the ASA at the remote site and those networked printers ...


I am assuming there is no filters on both ASAs for the IPsec tunnel us that correct ..?



Actions

This Discussion