cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
264
Views
0
Helpful
2
Replies

VPN issue

zhangziqian
Level 1
Level 1

Hi Guys,

I have a pair of ASA 5500 with ipsec tunnel in between. The issue is I am able to "ping" and connect to most of the nodes on the other side of the network but not all the nodes, especially those networked printers. I checked ip,mask and gateway and they are all correct. I amm also able to "ping" those nodes in the internal network (not remote side. Please help!!!!

Thank you so much

John

the other site

2 Replies 2

b.speltz
Level 4
Level 4

Check for any filtering of IP address like access list in the remote side router and also for ICMP

Fernando_Meza
Level 7
Level 7

you need to check what is in between the ASA at the remote site and those networked printers ...

I am assuming there is no filters on both ASAs for the IPsec tunnel us that correct ..?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: