04-23-2006 04:40 PM
Hi Guys,
I have a pair of ASA 5500 with ipsec tunnel in between. The issue is I am able to "ping" and connect to most of the nodes on the other side of the network but not all the nodes, especially those networked printers. I checked ip,mask and gateway and they are all correct. I amm also able to "ping" those nodes in the internal network (not remote side. Please help!!!!
Thank you so much
John
the other site
05-01-2006 05:18 AM
Check for any filtering of IP address like access list in the remote side router and also for ICMP
05-01-2006 05:31 PM
you need to check what is in between the ASA at the remote site and those networked printers ...
I am assuming there is no filters on both ASAs for the IPsec tunnel us that correct ..?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide