04-24-2006 10:49 PM - edited 03-03-2019 12:30 PM
Q:- If you have configured route redistribution between separate routing domains and have included route filters to prevent route feedback, which command would you use on a boundary router to verify that redistribution is working correctly?
A. show ip protocols
B. trace
C. show ip access-lists
D. ping
Q:- On Cisco routers, fast switching of policy-based routing _____.
A. is not supported
B. requires the ip fast policy interface configuration command
C. requires the ip fast policy router configuration command
D. requires the ip route-cache policy router configuration command
E. requires the ip route-cache policy interface configuration command
Regards
Mahi
04-25-2006 12:35 AM
Question 1 is "show ip protocols"
Question 2 I've got to look up but for some reason i want to say the answer is (A)
Can someone give a crack at question 2 and give us a firm answer.
Patrick
04-25-2006 12:54 AM
Good day
Qestion 2 answer is (E).
Regards.
04-25-2006 02:10 AM
Hi,
For first question A is not a correct answer... But i don,t know the correct one..
Kindly help me out...
Regards
Mahi
04-25-2006 02:14 AM
Mahi,
I believe the answer should be B. The reason is that a traceroute will show you the presence of a routing loop, which is a frequent result of route feedback when redistributing protocols.
Hope that helps - pls do remember to rate posts that help.
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide