04-26-2006 06:35 AM
All of my AP's are showing up as "Devices for which Inventory has never been collected ". Why is this?
04-26-2006 06:36 AM
It could be that they are not supported.
What is the sysObjectID of the AP's?
04-26-2006 06:47 AM
I have AP350's and AP1200's...
RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C350 Software (C350-K9W7-M), Version 12.2(13)JA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..TAC Support: http://www.cisco.com/tac..Copyright (c) 1986-2003 by cisco Systems, Inc...Compiled Fri 14-Nov-0"
RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAirAp350IOS
RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..Technical Support: http://www.cisco.com/techsupport..Copyright (c) 1986-2004 by cisco Systems, Inc...Compi"
RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAIRAP1210
04-26-2006 06:56 AM
Both ciscoAirAp350IOS (1.3.6.1.4.1.9.1.552) and ciscoAIRAP1210 (1.3.6.1.4.1.9.1.525) are supported in your version.
What error message (if any) do you get when you try to collect their inventory?
04-26-2006 07:41 AM
What error message (if any) do you get when you try to collect their inventory?
I am new to 2.5.1 and I do not see how to do this. I am also looking for Check Device Attributes.
04-26-2006 07:44 AM
RME -> Devices -> Inventory -> Inventory Jobs -> Create
Select the AP's and run the job
04-26-2006 07:49 AM
when I go to: RME -> Devices -> Inventory -> Inventory Jobs -> it sends me to this URL:
http://X.X.X.X:1741/rme/ICSJobBrowser.do
but the page never loads.
04-26-2006 07:56 AM
Looks like there are other issues to address then.
Sorry, not sure what could cause this.
04-27-2006 10:23 AM
i was able to run the collection and they all failed with one of the 3 reasons listed below.
-Device sensed, but collection failed
-Transport session to device failed. Cause: Authentication failed on device.
-Device Collection Failed
05-18-2006 03:38 PM
I had a similar problem with 1200 aps. Upgraded the IOS to 123-4 & the inventory is now working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: