backup link test

Unanswered Question
Apr 26th, 2006
User Badges:

Hi everybody,

I've tested the attached backup link configuration (conf_test.txt) using 2 routers with VWIC 2T on each, connected by CAB-SS-2626X.

Actually, we should use T2 as main link and leased line as backup.

The current config on the router where i should configure after testing is also attached here (current_conf.txt).

I'd like to know how can I simulate this scenario before configuring it on a live network?

is there any change to do on the test config when we use T2 and LL

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mastram4u Wed, 04/26/2006 - 23:19
User Badges:

As you did in the test config, you need to specify the route without AD for the primary and with AD for the backup link.

Hope that helps.

harinirina Thu, 04/27/2006 - 06:26
User Badges:

Thanks for the reply.

in the live network, we use VWIC-1MFT-E1 but not VWIC-2T.

I'd like to ask you if there's some modification to do in the config when i use other card or other protocol


This Discussion