×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to synchronize between DHCP binding table and DHCP snooping table ?

Unanswered Question
Apr 27th, 2006
User Badges:

I clear DHCP snooping table with command "clear ip dhcp snooping binding " , and PC can't communicate with other any more. So how to synchronize between DHCP binding table and DHCP snooping table ?


dhcp-test#sh ip dhcp bind

IP address Client-ID/ Lease expiration Type

Hardware address

99.1.65.32 0100.1125.353c.25 Mar 02 1993 01:05 AM Automatic

99.1.65.33 0100.1438.059f.85 Mar 02 1993 12:01 AM Automatic


dhcp-test#sh ip dhcp snooping binding

MacAddress IpAddress Lease(sec) Type VLAN Interface

------------------ --------------- ---------- ------------- ---- ----------

----------

Total number of bindings: 0


thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
thomas.chen Sat, 05/06/2006 - 06:38
User Badges:
  • Silver, 250 points or more

ip dhcp snooping binding mac-address vlan vlan-id ip-address interface interface-id expiry seconds

Add binding entries to the DHCP snooping binding database. The vlan-id range is from 1 to 4904. The seconds range is from 1 to 4294967295.


Enter the above command for each entry that you add

To delete the database agent or binding file, use the no ip dhcp snooping database interface configuration command. To reset the timeout or delay values, use the ip dhcp snooping database timeout seconds or the ip dhcp snooping database write-delay seconds global configuration command.To renew the database, use the renew ip dhcp snooping database privileged EXEC command.



Actions

This Discussion