IOS number translation

Unanswered Question
Apr 27th, 2006
User Badges:

Hi,


Voip Network: PBX connected to Cisco3800 using NMHDV; router working as voice gateway.


When my extenion makes call thru Cisco, router sends the actual CLI (043664741)to other h323 router. I want this 'specific' CLI to be translated to another series 08718553333.

i have to use translation rule or profiles...but some how it is not working.. any help..


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
anup.anand Thu, 04/27/2006 - 12:11
User Badges:
  • Silver, 250 points or more

Please paste your configs.


regards,


Anup

Brandon Buffin Thu, 04/27/2006 - 12:14
User Badges:
  • Purple, 4500 points or more

You could use a combination of a translation rule and a translation profile which then is applied to a dial peer, such as:


voice translation-rule 3

rule 1 /043664741/ /08718553333/


voice translation-profile profile1

translate calling 3


dial-peer voice 10 pots

translation-profile outgoing profile1


Voice Translation Rules

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml


Hope this helps. If so, please rate the post.

kumarss77 Fri, 04/28/2006 - 10:42
User Badges:

since its for out going calls, i guess should apply translation-profile outgoing profile1 on the 'voip dial peer' am i correct..


though i did that and tested stll translation wasnt happening place.


i am posting the config attached.



Attachment: 
anup.anand Sat, 04/29/2006 - 10:52
User Badges:
  • Silver, 250 points or more

The translation rule looks good. Apply it to the dial-peer, as below


dial-peer voice 1000 voip

translation-profile outgoing skyi


Regards,


Anup

Actions

This Discussion