05-03-2006 05:02 AM - edited 02-21-2020 10:15 AM
when i tried to install SDM on cisco2611 router it is asking for username & password of level 15 so configured a local user of level 15 on the router & provided the same creditentials to SDM installer but the authentications fails can any body pls clarify wht to do in this situation
regards & thanks in advance
05-06-2006 11:22 AM
A couple of things I've experienced installing SDM.
Make sure you don't have a firewall running on the PC attempting to install SDM from.
Set "line vty 0 15" to "login local" after you've set a userID and password.
Set "IP HTTP AUTH LOCAL".
05-06-2006 12:13 PM
I believe that SDM typically sets privilege level 15 on the vty. You might try that and see if it helps.
HTH
Rick
05-08-2006 09:05 PM
hi jeff,
there is no firewall in between or running on PC
and i tried your recomendationd but it did not work out.
is it any thing with the version of IOS, BTW i am using c2600-is-mz.12.2-34
regrds & Thanks in adv
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: