QoS for IP Telephony over DSL

Unanswered Question
May 3rd, 2006
User Badges:

Hi,


using the document "QoS Solutions for PPPoE and DSL Environments" as a reference I'm trying to implement Quality of Service for a DSL connection via the ATM interface on a 2821 router.


So I apply the service-policy under ATM VC configuration mode (PVC 8/35) and the command is accepted with no complaints, but when I do a show run, I realize the command is not there:


!

interface ATM0/0/0.1 point-to-point

pvc 8/35

encapsulation aal5snap

pppoe-client dial-pool-number 1

!

end


Any Idea why is this happening ?, we have version 12.3(14)T7. Is this the right way to configure QoS for DSL, or should I configure QoS on the dialer interface instead ? Any suggestions are welcome.




The document I checked can be found here.


http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800b2d29.shtml


Regards.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion