×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Issues with NM-1v and 2V on 2600

Unanswered Question
May 10th, 2006
User Badges:

Hi Guys,


I have small lab at home and want to start moving into the Voice and Data world, as I have been in the data work for 10 years now.


I have a NM-1V and NM-2V with FXO cards the problem is I can not see the cards from my 2610 and 2611 routers. I have tried changing the code to 12.1 IP Plus and even Enterprise Plus still no luck. Release notes say I should be all good from 12.0!! but still having issues.


Anything Im doing wrong ?? Any other advice to help me on my way ??


Thanks Warren.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
didyap Tue, 05/16/2006 - 06:30
User Badges:
  • Silver, 250 points or more

Ensure that the Cisco IOS Software image has the IOS Plus feature set. This is indicated in the image name by -is (for IP Plus) or -js (for Enterprise Plus). If the feature set is not present, either the voice hardware will not be recognized, voice features will not be available in the Cisco IOS parser, or both.


Try:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

Actions

This Discussion