Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 2821 Advanced IOS ver ( for IPSec support)

Unanswered Question


I have a Cisco 2821 model with following ver and memory available. I want to upgrade the IOS to advanced IOS for IPSec support. Will the existing flash mem will support advanced IOS ?. What is the path in Cisco site for downloading advanced IOS software?.



fss#sh ver

Cisco IOS Software, 2800 Software (C2800NM-IPBASEK9-M), Version 12.4(7), RELEASE


Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 01-Mar-06 07:22 by alnguyen

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

fssbomh uptime is 2 weeks, 2 days, 19 hours, 27 minutes

System returned to ROM by power-on

System image file is "flash:c2800nm-ipbasek9-mz.124-7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:


If you require further assistance please contact us by sending email to

[email protected].

Cisco 2821 (revision 53.51) with 196608K/65536K bytes of memory.

Processor board ID FHK1007F24W

2 Gigabit Ethernet interfaces

4 Serial(sync/async) interfaces

2 ISDN Basic Rate interfaces

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
cisand2002 Fri, 05/12/2006 - 02:23
User Badges:


min 256MB DRAM -- you have 196608K/65536K

min 64MB Flash -- 62720K

so for me it should not be a problem

but to dowload it you need cco login

To create a CISCO.COM (CCO) account, go to http://www.cisco.com and press the Register link at the top of the page.

HTH, please rate if helps.



This Discussion