×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

AP 1310 setting 802.11b

Answered Question
May 12th, 2006
User Badges:

Hi, the manual and the brochure of AP 1310 say that's possible to use the AP in 802.11b mode with 100 mW of maximum output power level but the the only working mode seems to be 802.11g @ 20 mW.

Is it really possible to change? Does anybody know how to do it?

Thanks a lot


Correct Answer by Rob Huffman about 11 years 3 months ago

Hi Manuel,


It looks like 20mw is the max for 802.11b. Have a look at this Field Notice;



Cisco Aironet 1300 Series


Field Notice: FN - 62021 - BR1310 Power Level Change


FROM THIS DOC;


http://www.cisco.com/en/US/products/ps5861/products_field_notice09186a0080537455.shtml


Hope this helps!

Rob


Please remember to rate helpful posts........

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Fri, 05/12/2006 - 06:47
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Manuel,


It looks like 20mw is the max for 802.11b. Have a look at this Field Notice;



Cisco Aironet 1300 Series


Field Notice: FN - 62021 - BR1310 Power Level Change


FROM THIS DOC;


http://www.cisco.com/en/US/products/ps5861/products_field_notice09186a0080537455.shtml


Hope this helps!

Rob


Please remember to rate helpful posts........

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode