05-14-2006 05:36 AM - edited 03-03-2019 12:41 PM
Hi
I want to upgraded ios in cisco 2500 router . kindly advise me in this regard
thanks in advance
thanks
*2500 console do not support console rite ?
05-14-2006 06:11 AM
Hi Williams,
Of course you can, here is a tip:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml
I done it a few times, it will take some hours but can be done.
HTH,
Loc P
05-14-2006 05:40 PM
are u sure 2500 do support xmodem for Console !?!?
05-14-2006 08:09 PM
Why don't you try this ?
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/prod_release_note09186a0080081127.html#5607
Loc P.
05-14-2006 08:02 PM
If you are in rommmon mode try following command:
connect router e0 to machine ethernet with cross cable.
following are list of command:
IP_ADDRESS=PC GATEWAY IS THIS IP
SUBNET_MASK=SAME AS YOUR PC
DEFAULT_GATEWAY=YOUR PC IP
TFTP_SERVER=YOUR PC IP
TFTP_FILE=WHICH IOS YOU WANT TO UPLOAD,IT MUST IN THE TFTP DIRECTORY.
tftpdnld.
I think this will help you.
Please rate this,
regards,
Yogesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide