×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

password recovery of 7609

Unanswered Question
May 16th, 2006
User Badges:

I am facing a problem while recovering the password of 7609. When router goes to Romon mode after pressing break key and i configure


confreg 0x2142

reset

boot

it doesnt bypass NVram


attached herewith is the show version output of the router

i really need it urgently



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mahmoodmkl Wed, 05/17/2006 - 00:13
User Badges:
  • Gold, 750 points or more

HI


From u r output u r config-register value is still 0x2102.


can u try this


config-register 0x2142


then do a reload


thanks

Mahmood

zahid77 Wed, 05/17/2006 - 00:42
User Badges:

yes u r right but i did this experiment but as i told that after configuring this 0x2142 value it doesnt by pass nvram. i took this show version output before configuring its config-register value


it is giving me some boot error

lenmc Wed, 05/17/2006 - 07:26
User Badges:

Try typing 'config-register' then 'return' and follow the prompts hitting 'return' until you get to the nvram line, type 'n' then complete the options with 'return', save the change and reload, this should bypass the config.

Actions

This Discussion