×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IOS UPDATE

Unanswered Question

Hi ankur 10xs for ur reply

sir;if i use this command:

copy tftp flash

Address or name of remote host [255.255.255.255]? 10.10.10.10

Source file name?c3560-ipservicesk9-mz.122-25.SEB4.bin

Destination file name? c3560-ipservicesk9-mz.122-25.SEB4.bin

Erase flash device before writing? [confirm] yes/no/yes

this command work or not?

10xs for ur reply

ali

ankurbhasin Sat, 05/20/2006 - 23:43
User Badges:
  • Red, 2250 points or more

Hi Ali,


I am not very sure about the copy command but looking at the documents (config guide and command reference for 3560) copy command is not present anywhere.I checked one of the very old ios for 3560 which is 12.1(19)EA1, February 2004 and this release also does no sow the copy commands in their documents and stressed on "archieve" command


Have a look at this link for 3560 config guide "Working with IOS file system"


http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12119ea1/3560scg/swiosfs.htm#1020620


But being an IOS based switch this command should be present there but not sure if that command will work or not but no harm in trying copy command, you can try that command if it is available in IOS.


HTH, if yes please rate the post.


Ankur

Actions

This Discussion