05-25-2006 10:21 PM - edited 03-18-2019 05:57 PM
When ordering call manager 5.0,If you select the
MCS7835I1-K9-CM50
HW/SW Unified CallMgr 5.0 7835-I1 Appliance, 0 Seats
Do you also have to order
LIC-CM5.0-7835-I1=
License CallMgr 5.0 7835-I1 Appliance
if you order LIC-CM-DL-1000=
CallManager Device License - 1,000 units
Do you also have to order the individual phone licenses e.g
SW-CCM-UL-7912
CallManager Unit license for single 7912 IP phone
Solved! Go to Solution.
05-26-2006 09:14 AM
Yes, you will need each of these. MCS7835I1-K9-CM50 is hardware. LIC-CM5.0-7835-I1= is software. LIC-CM-DL-1000= is licensing for 1000 units. You can order these from 10 to 1,000,000 units. As indicated in the following link, different model phones consume different numbers of unit licences. Individual phone licences are also required and typically purchased with a phone.
Hope this helps. If so, please rate the post.
Brandon
05-26-2006 09:14 AM
Yes, you will need each of these. MCS7835I1-K9-CM50 is hardware. LIC-CM5.0-7835-I1= is software. LIC-CM-DL-1000= is licensing for 1000 units. You can order these from 10 to 1,000,000 units. As indicated in the following link, different model phones consume different numbers of unit licences. Individual phone licences are also required and typically purchased with a phone.
Hope this helps. If so, please rate the post.
Brandon
05-30-2006 07:36 AM
"Individual phone licenses are also required and typically purchased with a phone."
This is incorrect. Unit licensing in CCM5 replaces individual phone licenses. Individual phone licenses purchased in previous releases of CCM can be converted to CCM5 license units.
See this thread for a helpful CCM5 licensing discussion:
05-30-2006 07:54 AM
Great information. Thanks for the clarification.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: