cisco 2811

Unanswered Question
Jun 7th, 2006
User Badges:

is there any published cisco documents that details the number of Simultaneous call set up requests a cisco 2811 can handele any any one time down an e1 pipe, for example , if 15 call set up requests come down the line to the GW (which is MGCP) can the GW handle these and what are the response times?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Rob Huffman Wed, 06/07/2006 - 05:18
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Dave,


Have a look at this doc that shows performance test results for all of the 2800 series ISR. Maybe this will help;


Test Results


The tests reported in this document were designed to stress-test the Cisco CME and the appropriate Cisco 2800 and 3800 Series Integrated Services Routers. Showing how many Busy Hour Call Completions (BHCC) with a full load of data were introduced into the router and how the router performed.


Test results with the Cisco CME on the Cisco 2811 Integrated Services Router


Testing 24-User Office

Cisco CME — configured for 24 IP phones

24 IP phones

Tested

Pass

Simultaneous call setup/teardown

24 IP phones (1044 BHCC)

Tested

Pass

Cisco Unity Express — configured with 24 mailboxes

24 mailboxes

Tested

Pass

Simultaneous voice mail and retrieval

4 connections

Tested

Pass

Incoming/outgoing PSTN calls

Tested

Pass

Fax — T.38

Tested

Pass


Cisco Business Communications Solution Verified Designs (Test Results Ver. 4)


Performance Test Cases


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_guide_chapter09186a008054bc93.html#wp1017779


Hope this helps!

Rob


Please remember to rate helpful posts.....

Actions

This Discussion