×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

virtual-profile aaa again: i'm puzzled

Unanswered Question
Jun 9th, 2006
User Badges:

Hi,


I am trying to get a dialup config to work that uses virtual profiles by virtual template and AAA configuration. When I follow the Config guides (12.2 in my case) I am told to use the command virtual-profile aaa. This command does not seem to exist in IOS anymore (or is always on as another NETPRO post by Glenn Fullager states).


My dialup connections cannot bind the IP address that is presented to the NAS by the radius server to PPP. Debug aaa per-user does not give one line of output. Am I missing a command or does somebody have an idea where I go wrong?


see attached config


Regards,

Mat



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
globalnettech Mon, 06/12/2006 - 00:59
User Badges:
  • Silver, 250 points or more

Hello,


which IOS feature set are you using (and on which platform) ? The config should indeed look like this:


virtual-profile if-needed

virtual-profile virtual-template 1

virtual-profile aaa

!

interface Virtual-Template1

ip unnumbered FastEthernet0/0

no ip directed-broadcast

no keepalive

ppp authentication chap

ppp multilink


Can you try and configure a local pool and see if you get this to work ?


Regards,


GNT

Actions

This Discussion