06-12-2006 12:53 PM - edited 03-03-2019 12:58 PM
Hi,
I?ve configured vtp pruning but I am still getting broadcast traffic from vlan 6. I just used the vtp pruning command. Do I have to configure anything else to enable pruning?
Thanks
06-12-2006 01:01 PM
hi,,,
will you clear it in more detail with your connectivity...and problem ...
here you are receiving the broadcast traffice of vlan 6 of one switch to other which is not having the vlan 6 am i right???
06-13-2006 07:53 AM
I?ve a 3550,routing between vlan?s. I?ve configured span to monitor one of the fiber ports and I am receiveing broadcast from computers in vlan6. Should I receive this type of traffic?
3550---------------vlan6
| |
fiber |
| | |
| ---vlan8------- vlan7
|
vlan1
|
|
vlan1
06-13-2006 08:06 AM
It got a little confused, but I?ve a dual ring topology among vlan?s 6,7 and 8 connected through fiber.
06-12-2006 01:13 PM
you can have more information form the given link
http://www.firewall.cx/vlans-vtp-pruning.php
rate this post if it helps
regards
Devang
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide