06-12-2006 10:30 PM - edited 03-09-2019 03:12 PM
I am having problems getting an Outside NAT config, can anyone help?
06-13-2006 04:41 PM
Have you checked your logs? there should log messages telling you of the failed translation.
06-14-2006 01:02 PM
There is not much to see..Maybe I'm not logging enought info..
pixfirewall# sh conn
0 in use, 0 most used
pixfirewall# sh xlate
0 in use, 0 most used
pixfirewall#
pixfirewall# sh traff
outside:
received (in 234.710 secs):
68 packets 6040 bytes
0 pkts/sec 25 bytes/sec
transmitted (in 234.710 secs):
1 packets 60 bytes
0 pkts/sec 0 bytes/sec
inside:
received (in 234.710 secs):
0 packets 60 bytes
0 pkts/sec 0 bytes/sec
transmitted (in 234.710 secs):
1 packets 60 bytes
0 pkts/sec 0 bytes/sec
pixfirewall#
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: