vladrac-ccna Thu, 06/15/2006 - 14:03
User Badges:
  • Silver, 250 points or more

Hello Fady,


Just a fast look.


I'd advise you to recheck:


router eigrp 10

no auto-summary


router rip

version 2

redistribute eigrp 10 metric 2

no auto-summary


Vlad

ciscothejam00 Fri, 06/16/2006 - 00:54
User Badges:

Thanks man,


But can you tell me why you've added the "no auto-summary"??? and why you have put metric 2 when redistributing EIGRP into RIP???


regards

Fady


devang_etcom Fri, 06/16/2006 - 02:29
User Badges:
  • Gold, 750 points or more

by default subnet routes are summarized to classful network route...so here by "no auto-summary"command you are advertiseing the subnet, not summary of subnet...accross the networks...


regards

Devang

vladrac-ccna Fri, 06/16/2006 - 03:28
User Badges:
  • Silver, 250 points or more

As devang explained if you have VLSM on your network and you are using rip version 2 and EIGRP , no auto-summary will enable your routers to send subnets not only classfull networks like 10.0.0.0


On rip and EIGRP you need to set a metric to the routes redistributed.


"The metrics of one routing protocol do not necessarily translate into the metrics of another. For example, the RIP metric is a hop count and the EIGRP metric is a combination of five metric values. In such situations, a dynamic metric is assigned to the redistributed route. Redistribution in these cases should be applied consistently and carefully in conjunction with inbound filtering to avoid routing loops. "


Hope this help a bit,

please rate this post if it does, I'd appreciate.


Vlad

Actions

This Discussion