Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RF information

Unanswered Question
Jun 29th, 2006
User Badges:

Hello All,

Could you please let me know that where can I find RF information from scratch to depth. Because my clients are facing RF problems in their premises in US.

I do not have any knowledge in RF.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Rob Huffman Fri, 06/30/2006 - 08:45
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Khan,

Here is some info to get you started;

WLAN interference can be generated by microwave ovens, 2.4 GHz cordless phones, Bluetooth devices, or other electronic equipment that operates in the 2.4 GHz band. Interference also typically comes from other access points (APs) and client devices that belong in the WLAN but that are far enough away so that their signal is weakened or has become corrupted. APs that are not part of the network infrastructure can also cause WLAN interference and are identified as rogue APs. When a site survey is performed, these devices have to be identified and have to be eliminated.

Wireless, LAN (WLAN)

RF Power Values


Wireless LAN Radio Frequently Asked Questions


Some Key Points to Remember About RF


Minimizing 802.11 Interference Issues


Improving Wi-Fi Performance by Avoiding RF Interference


There are many excellent books on Understanding RF if you search on Amazon.com.

Hope this helps!


Please remember to rate helpful posts......

I recently ran across a very inexpensive ($100 US) USB-based spectrum analyzer.

I heard about it from someone at Cisco (not an official endorsement, of course):

You can find the unit here:


A spectrum analyzer will look at the RAW RF signals. If you suspect foreign signal interference, this might be worth looking into.



This Discussion