×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Radius and WAP Load Balancing with IOS SLB

Unanswered Question
Jul 3rd, 2006
User Badges:

Hello.

We have a WAP Gateway architecture with three groups of servers that contain, each, a serverfarm of Wap Gateways and one Radius server (the three groups share the same VIP). We need the following behaviour: the Radius traffic that comes from the client (that points a VIP) is sent to one of the three Radius servers (round-robin). Then, the WAP traffic (type 1 or 2, that is WSP or HTTP protocol), that also points a VIP, is balanced across the WAP GW Servers of the same group of that Radius server. Is this possible with IOS SLB and how? Thanks a lot. Alessandro

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
fmeetz Fri, 07/07/2006 - 07:00
User Badges:
  • Bronze, 100 points or more

If you are running hybrid code and that is not supported. The CAT needs to be running Native IOS for SLB.


Actions

This Discussion