Rob Huffman Thu, 07/06/2006 - 04:43
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Richard,


The WS-PWR-PANEL only supports AP's with a single B-radio,so I think this will be problematic. Have a look;


Cisco Platforms and Daughter Cards


Access Point Compatibility Matrix


WS-PWR-PANEL


Cisco IPM Support - No

1130AG Series with 2 Radios - No

1200 Series with 2 Radios - No

All Access Points with 1 Radio - Yes (Only with 802.11b radio.)


From this doc;


Cisco Aironet Power Over Ethernet Application Note


http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008039e541.html#wp35628


The WS-PWR-PANEL is EOS/EOL as of May 25, 2006. Have a look at the migration options;


http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_eol_notice0900aecd80380fa0.html


Hope this helps!

Rob


Please remember to rate helpful posts.......

Actions

This Discussion