Hi Richard,

The WS-PWR-PANEL only supports AP's with a single B-radio,so I think this will be problematic. Have a look;

Cisco Platforms and Daughter Cards

Access Point Compatibility Matrix

WS-PWR-PANEL

Cisco IPM Support - No

1130AG Series with 2 Radios - No

1200 Series with 2 Radios - No

All Access Points with 1 Radio - Yes (Only with 802.11b radio.)

From this doc;

Cisco Aironet Power Over Ethernet Application Note

http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008039e541.html#wp35628

The WS-PWR-PANEL is EOS/EOL as of May 25, 2006. Have a look at the migration options;

http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_eol_notice0900aecd80380fa0.html

Hope this helps!

Rob

Please remember to rate helpful posts.......