×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

router as a frame relay simulator

Answered Question
Jul 6th, 2006
User Badges:

hello,

how can i configure a router to be a frame relay switch?

I have 3 1720 routers (A, B and C).


thanks

Correct Answer by leonvd79 about 11 years 1 month ago

Hello,


You can do so by entering the command "frame-relay switching" in global configuration mode.


Example

!

frame-relay switching

!

interface Serial0

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 102 Serial1 201

clock rate 72000

no shut

!

interface Serial1

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 201 Serial0 102

clock rate 72000

no shut

!

Refer to the configuration guide for more information.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcffrely.htm#wp1055601


HTH


--Leon


* Please rate posts.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2.5 (2 ratings)
Loading.
Correct Answer
leonvd79 Thu, 07/06/2006 - 02:53
User Badges:
  • Silver, 250 points or more

Hello,


You can do so by entering the command "frame-relay switching" in global configuration mode.


Example

!

frame-relay switching

!

interface Serial0

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 102 Serial1 201

clock rate 72000

no shut

!

interface Serial1

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 201 Serial0 102

clock rate 72000

no shut

!

Refer to the configuration guide for more information.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcffrely.htm#wp1055601


HTH


--Leon


* Please rate posts.

Actions

This Discussion