×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Logging commands not incorporated to 12.4(7) ??

Unanswered Question
Jul 14th, 2006
User Badges:

I am trying to filter out certain log messages from getting entering my log but the commands I want aren't integrated any reasons?

The command is logging buffered filtered

Logging filter isnt in there either.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnm_r/nmg_02h.htm#wp1052854


AM_1_IDC(config)#do sho ver

Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4(7a), RELEASE SOFTWARE (fc3)

System image file is "flash:c2800nm-advsecurityk9-mz.124-7a.bin"


AM_1_IDC(config)#loggin f?

Hostname or A.B.C.D facility


AM_1_IDC(config)#loggin buffered f?

% Unrecognized command


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (2 ratings)
Loading.
Joe Clarke Fri, 07/14/2006 - 12:41
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The Embedded Syslog Manager is not supported on the 2800NM platforms. It is only supported on the 2801 routers (from the 2800 series). I am uncertain why support was omitted from those other platforms.

Joe Clarke Fri, 07/14/2006 - 13:34
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Sorry, I missed the platforms in the Feature NAvigator list. ESM is supported on these platforms, but it requires SPSERVICES or better.

Actions

This Discussion