×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

conn vs xlate

Unanswered Question
m.sir Wed, 07/19/2006 - 00:24
User Badges:
  • Gold, 750 points or more

If client is connected to same server via telnet, FTP, and HTTP simultaneously so there are three separate TCP connections between the two devices - it would create a single translation slot (its between PC and server you can check with show xlate) and three connection slots (telnet, ftp, http - check it with show conn). Each connection slot is bound to a translation slot.

M.

Hope that helps rate if it does

i know this before itself. i got a problem from customer and he had send the following


Xlate:


PAT Global 10.32.60.45(1203) Local 10.239.32.49(2228)


Conn:


TCP out 10.80.134.181:3389 in 10.239.32.49:2228 idle 0:00:02 bytes 0

flags


so here i believe that the conn is initited by 10.80.134.181 to 10.239.32.49 with out translation..




Actions

This Discussion