×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QoS on switch

Unanswered Question
Jul 19th, 2006
User Badges:

Hi


I'm installing a set of new switches. Currently we have a voice vlan in our network. My question is, are there any QoS options on the switches, if so how can I use them?


Siwtches: HP/Cisco CGESM Blade modules

CISCO IOS 12.2(25)SED


Thanks for your help.

Dan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
zerozerotito Wed, 07/19/2006 - 04:34
User Badges:

Hi dan!


CGESM Blade modules support QoS...


http://h18000.www1.hp.com/products/quickspecs/12164_div/12164_div.html


Well you can use AutoQoS and Standard QoS


Following link will take to configuration guide... It opens slowly so keep your patience...:)


http://www.cisco.com/application/pdf/en/us/guest/products/ps6238/c1067/ccmigration_09186a00805e9035.pdf


Anyhow hope it helps

rafaelgarcia Wed, 07/19/2006 - 18:08
User Badges:

Hi,


I agree with Dan regarding the Auto QoS implementation. I would be enough for your enviroment if your traffic is not that heavy and it is a great feature.


I talked to a friend of my which is a Cisco Network Design engineer and he told me that Auto QoS needs to be implemented on a clean configuration. Basically you need to erase the configuration of the switch, enable QoS typing mls qos and create each port as a trunk port depending the end device (switch, IP Phone, etc). Otherwise you might find issues with it.


Let me know if it helps.


Actions

This Discussion