07-19-2006 04:08 AM - edited 03-03-2019 04:07 AM
Hi
I'm installing a set of new switches. Currently we have a voice vlan in our network. My question is, are there any QoS options on the switches, if so how can I use them?
Siwtches: HP/Cisco CGESM Blade modules
CISCO IOS 12.2(25)SED
Thanks for your help.
Dan
07-19-2006 04:34 AM
Hi dan!
CGESM Blade modules support QoS...
http://h18000.www1.hp.com/products/quickspecs/12164_div/12164_div.html
Well you can use AutoQoS and Standard QoS
Following link will take to configuration guide... It opens slowly so keep your patience...:)
Anyhow hope it helps
07-19-2006 06:08 PM
Hi,
I agree with Dan regarding the Auto QoS implementation. I would be enough for your enviroment if your traffic is not that heavy and it is a great feature.
I talked to a friend of my which is a Cisco Network Design engineer and he told me that Auto QoS needs to be implemented on a clean configuration. Basically you need to erase the configuration of the switch, enable QoS typing mls qos and create each port as a trunk port depending the end device (switch, IP Phone, etc). Otherwise you might find issues with it.
Let me know if it helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide